Recent content by nate.mchugh1986

  1. nate.mchugh1986

    Is my allison spent?

    P0735 gear 5 incorrect ratio P0748 trans fluid press solenoid P0763 shift solenoid malfuc P0872 trans flu pres sensor/switch "c" circuit P0700 tcm malfunc Those are the codes I pulled, and cleared, and when i attempted to move the truck, loud clunk, imidiate limp mode, and so much drag it...
  2. nate.mchugh1986

    losing coolant, no leaks or white smoke

    P0700, p0735, p0748, p0763, p0872 I need to do some research, but I think I need a new trans. Any advice?
  3. nate.mchugh1986

    losing coolant, no leaks or white smoke

    Not a motor issue. Just hooked up a scan tool, nothing but 700 codes....trans issues for days
  4. nate.mchugh1986

    losing coolant, no leaks or white smoke

    Okay, so its not losing all pressure, drained the oil i put in the other day, and it was as it should be. I think the coolant loss was just filling all the gallies. When I put it in forward gears, it puts the truck in limp mode and causes a stall out, but i can reverse with no issues. I...
  5. nate.mchugh1986

    losing coolant, no leaks or white smoke

    last weak I blew the side of my radiator out. Tonight, new radiator is in, 5 gallons of coolant, drained the oil, no coolant there, 10 quarts in, time to fire it up. Starts up no problem, no white smoke, no loss of oil pressure, no leaks. I let it idle 20 or so mins, put her in retreat, no...
  6. nate.mchugh1986

    "OFFICIAL" What did you do to your D-Max today?

    Had the tranny line from tranny to cooler develop a leak where it was rubbing on the oil pan flange, bandaided it with an old washing machine hose and four hose clamps, get the new line at 8 a.m. and then the fix it game begins.....it'll be a beer drinking good time for sure.
  7. nate.mchugh1986

    Fuel pump/sending unit question

    Look at the filler neck. Where it goes into the tank it can develop a crack. Had to replace the tank on my '04 and both tank straps were fine. Good luck.
  8. nate.mchugh1986

    LB7 max hp/torque

    Bump The search is good but it takes you out of the forum and back to Google, it's irritating but it is useful.
  9. nate.mchugh1986

    need advice and links please!!

    IMO Possibly doesnt cut it, in regards to a lift pump You need a lift pump with a dual-particulate/water filter I have no idea where I would even begin for what to get for a pump. I know I want a fass pump but I don't know the difference between 50ghp(may have the wrong letters if that...
  10. nate.mchugh1986

    need advice and links please!!

    Brent I definitely like your site and prices!!! I need to do a lot more leg work before I start buying parts though. But in about 6-7 weeks I'll be making some small purchases anyway ( leaving state for work) but before I start spending big money I need to find a local tuner to find out what I...
  11. nate.mchugh1986

    need advice and links please!!

    I'm not trying to be lazy, just new to the diesel world and don't want to end up bent over with no lube, that's all, and thanks for the tips.
  12. nate.mchugh1986

    need advice and links please!!

    So here's what I got going on....long crank ( 10-30 seconds before start), every time I fill up the truck just plain won't start without help (tiny shot diesel starter fluid...NOT EITHER), lobe at idle, constantly popping the p0093 (large fuel leak) that bout sums it up. Here's what I want to...
  13. nate.mchugh1986

    need help!!!! fuel issue real bad!!

    P0090. Cleared it went for a drive, piped a p0093 going up hill, kicked the fprv....so any thoughts as to wtf I actually have going on here? And fyi I didn't hold my hand next to the cracked injector, a buddy (happens to be a Cummins owner) said this is what he does, and stood back while I...
  14. nate.mchugh1986

    need help!!!! fuel issue real bad!!

    Put a good charge to the batteries and she decided to fire up. But forgot to plug that stupid regulator back in so it was an interesting 1/4 mile loop. Now gotta figure out how to plug that little bugger back in without tearing it all apart!!!! Still contemplating the fire idea lol.
  15. nate.mchugh1986

    need help!!!! fuel issue real bad!!

    No funky colored exhaust that I can see while cranking. I was also thinking bad fuel but not sure how comin it is for a busy chain fuel station. And you assumed correct Judd I don't have a mightyvac tool.
See more
Top Bottom