Recent content by Dirtyryan

  1. D

    Emission questions

    Currently exploring all options. CommieFornia is in my rear view. Debating on whether to bring or leave wife
  2. D

    Emission questions

    Thanks for all the advice. Some comments have gotten me a little weary of running some mods. My fed truck doesn’t have a cat so I will be running a down pipe exhaust with a muffler. I hear if you don’t put a muffler on they can also fail you. I will also be adding a bigger intake. Still a...
  3. D

    HELP!!!!!

    How long was it running after your install I know by first hand sometimes these trucks take a little bit to get all the air out of your fuel lines
  4. D

    Emission questions

    Cool thanks for the info. The mechanic/smog shop I rarely go to is pretty lenient. I just want to make sure that down the road I’m not putting some parts on my truck that will give me a 490$ smog bill
  5. D

    Emission questions

    02
  6. D

    Emission questions

    Got back from the smog shop and found I have a fed emissions truck. I live in CA and was wondering what kind of mods I can add legally. Thinking of straight pipe and muffler delete
  7. D

    Crankcase full of fuel

    Just had same issue with mine... it’s your injectors. I bought mine from Lincoln diesel. Look for suggestions for places to buy them because if you are buying re mans you will want to get them from a reputable source. I bought all 8 brand new Bosch injectors, injector kit, and cat nictane...
  8. D

    Help with disaster

    So far it has been night and day from what I have been used to working on. I got 380k on the 7.3 and 449 on my 6.0 without any major work, I’ve done sacrificial religious maintainence but only have done injectors and turbo in the 6.0 pretty sure the stock injectors are still in the 7.3 but I...
  9. D

    Help with disaster

    Thanks all never had a problem like this, I’m used to wrenching on a bit older diesels. You guys definitely helped steer me in right direction. Runs like a dream. It would probably be sitting at the dealer with a big tab and no diagnosis
  10. D

    Help with disaster

    Can’t even describe how stupid I feel, went through about 500 times and checked everything found nothing. I disconnected batteries one more time, unplugged the big harness on the drivers side one more time to inspect the pins and sure as shit one was a little bent upward. Fixed the bent prong...
  11. D

    Help with disaster

    Directly behind ac compressor? That all looks to be in tact and the wire connection directly on top is undisturbed. Is there another connection I’m missing?
  12. D

    Help with disaster

    I didn’t do anything to fpr... which part is the cp3?
  13. D

    Help with disaster

    Thanks for all the help, looking into all of this. I started and ran truck 4 times for about 5 minuets each with the foot on the accelerator to about 1000rpm because it sounded like he’ll at idle. Didn’t do anything to oil pump, just kind of figured with that much psi and running the engine for...
  14. D

    Help with disaster

    I’ll look into it here shortly, the bale connectors your referring to are the connections coming off the injector wires right? Now you got me thinking, I’m sure I put it on right because I took pictures of dismantling but if I don’t have the injector wires hooked to proper terminals it could...
  15. D

    Help with disaster

    I don’t have a scan tool, all I have is an OB2 code reader. Any good suggestions on purchasing one? I primed and burped it about 3-4 times. The primer pump keeps going soft. Shouldn’t it remain stiff due to having pressurized fuel
See more
Top Bottom