Recent content by buick455

  1. B

    E35B Post-Flash Issue - Am I alone?

    The 5000 ohms to ground at initial key off is likely voltage. Even if the module is bad, it's still pretty likely the case. The modules don't normally "sleep" right at key off. At least on the heavy duty side of things, you can be keyed off forever, but if for example the door is open (or any...
  2. B

    GM should have stuck with Allison

  3. B

    GM should have stuck with Allison

  4. B

    GM should have stuck with Allison

    The only bellhousing options I'm seeing are SAE but that's on the Allison side. The extension housing does show an option for a transfercase and it is beefy. I'll attach a picture.
  5. B

    GM should have stuck with Allison

    Allison is coming out with their new 9 speed medium duty transmission. It's been known about for quite a few years now but it's finally coming to market. I can tell you that it is 100% just like the current 1000/2000 series 6spd, of course with some added parts and a bit longer case. It appears...
  6. B

    LB7 stock turbo longevity and upgrade options?

    Brad, what's this JZ Mfg? I've never heard of them?
  7. B

    Lbz Engine build

    I have heard of the Brian Crower rods but I don't know if I recall of anyone running them? I'm not saying they're bad, I just haven't heard of many/any running them. The $1200 is pretty darn cheap.
  8. B

    Anybody run a LLY VVT turbo with a waste-gate actuator controlling the vanes?

    Oh, I'm well aware. The op seems like he's looking outside the box per say so I'm just saying it is possible with available parts on the market. That said, I'm not going that route and mine has been a mostly dedicated puller for quite a few years. Factory ECM here.
  9. B

    Anybody run a LLY VVT turbo with a waste-gate actuator controlling the vanes?

    One of my friends has a custom made ECM on his LB7 dedicated pull truck. The ECM was made by a local guy. It did burn up a few injector drivers in the testing stages, and they are replaceable in that unit, but it has ran great otherwise the last 2 seasons.
  10. B

    Anybody run a LLY VVT turbo with a waste-gate actuator controlling the vanes?

    My understanding was opposite as far as motec vs bosch. I thought the motec ecu was quite a bit cheaper than bosch but I could be wrong. But idk if you can even order a "new" bosch as of right now can you?
  11. B

    Need Allison Builder!

    I know Fleece used to build them many moons ago but do they still build them? They were some of the early ones doing them.
  12. B

    Busted links

    I actually find that to be the case with many of the old links, not just in that thread. I don't use tap talk.
  13. B

    Front axle limited slip

    Has anyone used the Greensburg Machine front diff locker yet? Anyone use one truck pulling? I'm just curious on the durability. The air locker seems to be pretty darn reliable but a pure mechanical locker is intriguing.
  14. B

    Anti gravity lithium batteries

    How well would these hold up to an engine startability issue though, like loss of fuel or communication to the ECM? How long would they survive cranking and if they did it once how many times could they do it? Any known longevity testing of these in not ideal starting situations, even say like...
  15. B

    LB7 stand alone harness questions

    Thanks for the reply guys! 👍
See more
Top Bottom