Recent content by 02maxhd

  1. 0

    Remote mount suggestions

    Thanks
  2. 0

    Remote mount suggestions

    Your probably not going to notice a difference between 1" 7/8 or 2". The longer the pipes are, the thicker wall i would use due to warping. Side mounting the turbo is nice for cleaning up the valley, and eas of removal and install. It makes for a nice clean set up, but i think for all out...
  3. 0

    Remote mount suggestions

    thinking 11 gauge stainless
  4. 0

    Remote mount suggestions

    I can do the math, just hoping someone with some real world experience could chime in.
  5. 0

    Remote mount suggestions

    Thanks for the comments, but does anyone have a recommendation on sizing the hot pipes.
  6. 0

    Remote mount suggestions

    Thinking about remote mounting my turbo, for ease of maintenance, bigger down pipe, eventual improvement to the y bridge/runners, ect. The fabrication/welding will not be a problem for me. Just looking for some suggestions on tubing size, layout, ect. Will be using my 366 for now(66/73/.88)...
  7. 0

    turbine housing

    Running a race tune from pat, egt's are fine daily driving,just gets hot quick at wide open. Not really comfortable with making any large tuning changes, still trying to get a handle on how everything works.
  8. 0

    turbine housing

    Does anyone make a larger aftermarket housing, or is it time to go to a bigger frame
  9. 0

    turbine housing

    Trying to get a handle on all the different options when it comes to turbo sizing. Right now have an airwerks s366on the truck, its a 66/73/.88. Was wondering what advantage there would be to replacing the .88 open turbine housing with a .91 divided. Right now have insane egts, peg a 1600 degree...
  10. 0

    S366 Turbo Question

    I'm running a 66/73/.91 cast housing, and it's no problem to peg a 1600 egt gauge.
  11. 0

    S366 Turbo Question

    Out of curiosity, what kind of difference in egt would a guy see between a 472/366 in a 600hp truck?
See more
Top Bottom