PPE Dual CP3

[ripmf666]

Anyone have the install paper work for the PPE dual cp3 kit, I laid everything out and looking and was trying to figure out what the gold looking fuel block is and were the lines all go to. any help would be great.

Thanks
Henry

[Stingpuller]

Your gold block goes on the drivers side from the fuel rail around the gloplug control, and back to the 2nd CP3. I dont have the instructions but they were very hard to read anyhow. If you need anything give me a call. Jeff 740-808-6728

[ripmf666]

Thanks Jeff, Was looking at all of it looks like I use my race valve in the top of the fuel block.can you port that supply fitting on the rear like the front ones or no.also when looking on ppe's site looks like the kit in pics doesnt use th eblock or is that a dodge kit?

[Stingpuller]

I made my own race :ovalve(welded the hole shut). Yes you would use your race valve in the regulator. I didn't port the new fitting any. I could only hope to need more fuel than what 2 pumps:D can push.

[ripmf666]

LOL I have to fuel rails off my truck that leaked from the screwing up the shim on the fprv thought about welding the ends shut on those lol.

[sweetdiesel]

I drilled out all my fittings,but dont know how it will work yet

[ripmf666]

earlier we were looking at all of it, I took the idex dril bits and checked th eported fitting from ppe it was 125 thousands and the fitting the feed the back of the rail on the dual cp3 is the same, so we drilled the pass side fitting out to 89 thousands.Now I just need to see were all the rubber lines run to Jeff any pics you have would be great.

[slowlmm]

Yes port them both mine are about 90 thousands i belive lmm had abigger hole allready then the lbz and lbz are bigger then the lly

[ripmf666]

I got everything from Dan, I talked to there web guy and he emailed it all to me.

[sweetdiesel]

think Dan would mind if we posted the install instruction on here?
I have the PDF for the lb7

[ripmf666]

I'll call and ask

[SIKDMAX]

Bump. need one for my LMM install.

[RPM Motorsports]

Just curious, what the kit without CP3 run's. Any idea? You can PM if needed.

[heathgu]

I would be also be interested in the cost of the kit without the CP3.

pm is fine also.

Cheers Heath

[ripmf666]

pm's sent:hug:

[dmaxn04]

PM me price W/Out the cp3 also..

[MMLMM]

Heres the PDF. Someone posted them here for me awhile back.