Left Hand Alli Filler tubes [Archive] - Duramax Diesels Forum

PDA

View Full Version : Left Hand Alli Filler tubes


Mike L.
04-02-2008, 09:24 AM
Guy and I now have Alli filler tubes that fit the left side of the trans for the guys that have big turbos and no room on the right side. 70.00 plus shipping.

McRat
04-02-2008, 10:35 AM
Sell me one Mike!

Lonnie
04-02-2008, 12:59 PM
Do you have a picture of one mounted on a trans. I have a rt side clearance issue & depending on how it is routed, I may be interested in a left side tube.

Mike L.
04-02-2008, 01:29 PM
Do you have a picture of one mounted on a trans. I have a rt side clearance issue & depending on how it is routed, I may be interested in a left side tube.

No pictures yet It hugs the left side of the Alli pretty well and fits under the fuel lines nicely. It is the exact same length as original so no dipstick replacement is necessary. No core return on the old one as another company requires on theirs. These are brand new.

MMLMM
04-02-2008, 07:21 PM
Just swap the plug to the other side or what?

slowlmm
04-02-2008, 07:25 PM
yep pretty much. i need one of theese it will make your instalation much easier mike

MMLMM
04-02-2008, 07:48 PM
yep pretty much. i need one of theese it will make your instalation much easier mike

Thats what I was thinking, I thought of you saying the dipsitck was a PITA when I saw this, LOL.

Mike L. hold one aside for me please, PM me the address to send moola. :D

TNRGreene
04-02-2008, 08:09 PM
Mike,
I'd like to replace the one I have with a nicer one :D Mine works but....
Paypal you? Details man, details...LOL

duratothemax
04-02-2008, 08:12 PM
where was this 2 years ago mike! :D

Sometime in the future Ill definetly be buying one of these...

C.A.P
04-02-2008, 09:12 PM
What none of you like the way the stiocker fits with a bigger turbo ? Come on there is lots of room !








If you have fingers like ET ! Yes this will help with them fatter downpipes!

radvans
04-02-2008, 09:35 PM
Mike, do you take paypal?

sweetdiesel
04-02-2008, 09:40 PM
Add one to my list Mike
If there was anything more a PITA when installing bigger down pipes this was it!

Turbotug
04-02-2008, 10:25 PM
SpecialagentPK you WILL want one of these.

slowlmm
04-02-2008, 10:40 PM
wonder if it will void my warranty LOL

Kat
04-02-2008, 11:01 PM
wonder if it will void my warranty LOL

:rofl:

I doubt it, but the lift pump might if you ever install one :frog:

cnagpilot
04-02-2008, 11:06 PM
How about dual dipstick setup?:D

Mike L.
04-03-2008, 06:58 AM
How about dual dipstick setup?:D

Nothing wrong with more breathing. :D

slowlmm
04-03-2008, 11:08 AM
:rofl:

I doubt it, but the lift pump might if you ever install one :frog:


LOL trying ot decide on wich one to get right now :)

McRat
04-03-2008, 11:17 AM
I'm testing a new Lift Pump system. Interested?

SIKDMAX
04-03-2008, 11:23 AM
Bummer.... wish I was closer for testing Pat I need to get one ASAP.

slowlmm
04-03-2008, 11:45 AM
I'm testing a new Lift Pump system. Interested?


yess sir :D let me know im just hanging out today rain killed work for me

bullfrogjohnson
04-03-2008, 06:39 PM
Save one for me Mike, mines zip tied up and out of harms way for now

WolfLLY
04-09-2008, 06:02 PM
Save one for me Mike, mines zip tied up and out of harms way for now

Same here lol

Mike L.
04-09-2008, 07:18 PM
Guy and I are expecting more of these very soon. He carries them as well as I do. Guy is having these built as a favor to me and without his vast influence I doubt that I would have them. :hug::D

WolfLLY
04-15-2008, 03:23 PM
Is there a hole on the left side?? I didnt notice last time I was in there.

duratothemax
04-15-2008, 06:45 PM
Is there a hole on the left side?? I didnt notice last time I was in there.

yes, it just has a rubber/plastic plug in it.

Mike L.
04-15-2008, 07:21 PM
yes, it just has a rubber/plastic plug in it.

Just transfer the plastic plug to the passenger side of the Alli case. :cool:

WolfLLY
04-21-2008, 09:26 PM
Mike I hope you have one of these for me:) I think Kat is coming by to get one for me:witch: tomorrow.

Kat
04-21-2008, 09:30 PM
Mike I hope you have one of these for me:) I think Kat is coming by to get one for me:witch: tomorrow.

No, he didn't but Guy is sending me one :D I will have it tomorrow.

WolfLLY
04-21-2008, 10:13 PM
No, he didn't but Guy is sending me one :D I will have it tomorrow.


Sweet:hug:

LBZrcks
04-27-2008, 05:33 PM
Guy and I are expecting more of these very soon. He carries them as well as I do. Guy is having these built as a favor to me and without his vast influence I doubt that I would have them. :hug::D

Do you have these for the LMM's? I think they are different compared to the other trucks aren't they?

duratothemax
04-27-2008, 06:00 PM
Do you have these for the LMM's? I think they are different compared to the other trucks aren't they?

should be the same...?

slowlmm
04-27-2008, 06:08 PM
mike mmlm got one and said it was way to short so duno ? mikey ?

MMLMM
04-27-2008, 09:26 PM
mike mmlm got one and said it was way to short so duno ? mikey ?

Yea, by like 12", I know cause I measured with my.....nevermind, LOL.

Anyway, Mike L. you know anything about this, I got mine and it was way different than stock? way too short.

slowlmm
04-27-2008, 09:48 PM
Yea, by like 12", I know cause I measured with my.....nevermind, LOL.

Anyway, Mike L. you know anything about this, I got mine and it was way different than stock? way too short.

LOL ewwwwwww :rofl:

LBZrcks
04-27-2008, 10:09 PM
LOL ewwwwwww :rofl:

ewwww? what's wrong with him having to use his pinky?





























:rofl::rofl::rofl::rofl:

Kat
04-27-2008, 10:17 PM
:witch: is going to keep her mouth shut :rofl:

slowlmm
04-28-2008, 12:10 AM
[QUOTE=LBZrcks;60722]ewwww? what's wrong with him having to use his pinky?































:rofl::rofl::rofl::rofl:[/QUOTE

you would know :eek::D

Mike L.
04-28-2008, 07:34 AM
I will check into this.

duratothemax
04-28-2008, 07:43 AM
ahhh...the cowl does extend a lot further forward on the LMM's...maybe it wont fit because of that?

Booger
05-03-2008, 11:24 AM
That cowl does come out wayyy far making the dipstick really long. The LMM dipstick hangs out like a foot and a half out the bottom of the left handed dipstick tube that Mike had. Plus the OEM dipstick has a bunch of different bends in it than the other trucks because we were going to see if it could just be extended, but wasnt possible.

Trippin
05-03-2008, 12:35 PM
Longer LMM versions coming up. :D

Booger
05-03-2008, 12:44 PM
Sweet. That is a definite must.

WolfLLY
05-28-2008, 06:54 PM
Okay HOW do you get these installed? I couldnt get mine to fit at all.

TNRGreene
05-28-2008, 07:01 PM
Okay HOW do you get these installed? I couldnt get mine to fit at all.

I'm only guessing but did you take out the trans cross member & lower the trans a little? I may be way off base but while I was playing around with my own design that was the only way I could get it in. I can't be sure this is your problem

RENODMAX
05-29-2008, 12:42 AM
I'm only guessing but did you take out the trans cross member & lower the trans a little? I may be way off base but while I was playing around with my own design that was the only way I could get it in. I can't be sure this is your problem

You dont have to move anything to get it in. Lowering the trans would help, but you can do it without its just a PITA.

WolfLLY
05-29-2008, 07:02 AM
Can someone show pics of it installed. I would like to see its location so I know Im trying to put it in the right hole:D

sweetdiesel
06-10-2008, 04:37 PM
Can someone show pics of it installed. I would like to see its location so I know Im trying to put it in the right hole:D


Probloms finding the right hole:D Ill take some pics of mine in a couple days

The install went so smooth on a lb7,the only thing i had to do was remove a few of the bolt that holds the fuel lines on

It makes for a lot of room now for larger down pipes:cool:

The Neens
06-11-2008, 09:54 PM
I would like to see its location so I know Im trying to put it in the right hole:D

Please keep it clean, this is a family-friendly forum;)

Probloms finding the right hole:D Ill take some pics of mine in a couple days

Please don't get those pics developed...PLEASE!!!

LBZrcks
06-11-2008, 10:05 PM
Probloms finding the right hole:D Ill take some pics of mine in a couple days


:rofl::rofl::rofl:

You walked into that one Simon

CHYKYNLIPS
06-05-2010, 09:50 AM
Anybody ever come out with one for the LMM?

CHYKYNLIPS
06-06-2010, 04:18 AM
Nevermind, Mike L told me through pm that the ds dipstick will not work on the LMM. Wonder if flex pipe would work? Cut off the first few inched of the tube then use hose clamps to attach a small diameter flex pipe? Im not sure if it will allow fluid in it though without leaking out.

JD4440
06-06-2010, 08:31 AM
No problem on the LBZ, right ? GPCM ??

CHYKYNLIPS
06-06-2010, 10:23 AM
No problem on the LBZ, right ? GPCM ??

right. the lbz was what it was designed for but i think it works on all except the LMM because the lengths are different. Ive heard some guys say the gp controller was the only snag and i have heard others say it was not an issue.

JD4440
06-06-2010, 08:13 PM
I also wondered since I have a co-piolt in that hole now will the harness reach from the other side ?

pepperidge
05-16-2011, 07:17 PM
I think I need one with the ProFab downpipe on the new build Mike...Should I just call you on that?

Thanks

Mike L.
05-18-2011, 01:52 PM
I think I need one with the ProFab downpipe on the new build Mike...Should I just call you on that?

Thanks

Give me a call.

SSchmi5519
05-18-2011, 07:01 PM
I can get a pic for you.

pepperidge
05-20-2011, 07:12 PM
Give me a call.


Will do... :thumb: